The passport 8500 has a remote mount kit that has a power light, a warning light, and a mute button. My mod is to use a different set of lights for both power and warning, have them inside of a…
The passport 8500 has a remote mount kit that has a power light, a warning light, and a mute button. My mod is to use a different set of lights for both power and warning, have them inside of a…
I updated the neon page today after i did some rewiring and got some better pictures of what they look like for real. I also took some pictures of the new hardwire setup for the radar detector, but i’m to…
working on rigging up an engine start button to control the remote mount of the radar detector. Blew up one remote mount kit already 🙂
I got the last of Fig’s pre-production prop kits off of IS300.net. He sold it to me with the caveat that it needed to be painted or it would rust. No biggie there, i have some GGP spray paint to…
Hardwired in the Radar Detector. The cord was JUST barely long enough! No pics yet.
I got in on a Group buy of Prolex Performance stuff from the crew down at Carson Toyota in Carson, CA. I ended up getting 3 of the 4 products they were doing the GB for: Vented Radiator Panel Heat…
I got some orange neon accent lights (for the interior, not underbody!). They are mounted in the door storage areas, and they work perfect. Some more orange interior light, but when off, they are invisible. When on, they are dim…
This one was kindof tricky, actually. The momo boot actually screws onto the bottom of the knob. But the boot can’t turn, as it needs to be snapped into the console… And the knob can’t turn, because its basically screwed…
Since all of these installs were so easy, its just going to be before/after pics!
The newest mod to Hazy is the Pro Lex Performance “Second Generation” short shifter (PLP G2 is what everyone calls it). Wasn’t too complex of an install, pretty straightforward. It came with all the instructions you need, and you don’t…